Tag: eliminate mould

  • Why a Certificate of Decontamination Matters: Peace of Mind and Proof of Professionalism

    Why a Certificate of Decontamination Matters: Peace of Mind and Proof of Professionalism

    When dealing with issues like mold, rodent infestations, or bacterial and contaminant problems in Duncan, Cowichan, Ladysmith, Nanaimo, Parksville, Qualicum Beach, Port Alberni, Courtenay, Comox, Campbell River or anywhere on Vancouver Island. , addressing the problem is only part of the solution. Knowing that the work was done thoroughly and professionally is just as critical. That’s where Pacific Decontamination Services sets itself apart by providing a Certificate of Decontamination after every project. This document is more than a formality—it’s your assurance of a job well done and a valuable resource for future needs. Our Certificate of Decontamination has been successful on allowing real estate deals to continue and been accepted as proof of remediation – especially with home inspectors identifying suspected mold on the roof sheathing of attics.

    What is a Certificate of Decontamination?

    The Certificate of Decontamination is a detailed document issued upon the completion of a remediation project. It outlines:

    • The steps taken to address the contamination issue.
    • The threats neutralized, whether chemical, biological, or both.
    • The scope of the work performed, ensuring transparency and accountability.

    This certificate applies to a range of services, including mold remediation in attics, crawl spaces, and residences, as well as rodent infestation cleanup or bacterial decontamination.

    Benefits of Having a Certificate of Decontamination

    1. Proof of Professionalism
      The certificate serves as an official record that the remediation work was performed by skilled professionals. It confirms that proper protocols were followed and that the affected area is safe and clean.
    2. Peace of Mind
      Dealing with mold or contaminants can be stressful. Having a certificate that outlines the measures taken provides reassurance that the issue has been resolved effectively. You can trust that your home or workspace has been restored to a safe condition.
    3. Compliance and Documentation
      For properties under inspection or sale, the Certificate of Decontamination is often a requirement. It demonstrates to potential buyers, tenants, or inspectors that the problem has been remediated to professional standards.
    4. Transparency and Detail
      The certificate provides clarity about the scope of work performed. Whether it’s mold removal, rodent waste cleanup, or disinfecting bacteria-laden areas, the document gives a clear picture of what was done and why.
    5. Long-Term Assurance
      Even after the work is done, having detailed documentation on hand is valuable. It can help address any questions or concerns that might arise in the future about the property’s history or the quality of the remediation efforts.

    Why Choose Pacific Decontamination Services?

    At Pacific Decontamination Services, customer satisfaction and safety are our top priorities. Our Certificate of Decontamination reflects our commitment to transparency, professionalism, and thoroughness. Whether you’re dealing with mold, a rodent infestation, or other contaminant issues, we ensure that the work is completed to the highest standards—and provide documentation to prove it.

    Our Services

    A Certificate of Decontamination is more than a piece of paper—it’s a testament to the quality and care taken in addressing your contamination issues. With Pacific Decontamination Services, you not only get the expertise to handle complex problems but also the peace of mind and proof that the job was done right.

    Take the worry out of remediation—choose Pacific Decontamination Services and rest easy knowing you’re in good hands

    What Can You Do?  We Can Neutralize Your Mold or Rodent Infestation!

    In most situations, Pacific Decontamination Services can neutralize your mold up 99.99999%. If our spray, fog or foam can touch it, we can neutralize it.  Our services come at a fraction of the cost as compared to the expensive approaches like soda / dry ice blasting, hepa vacuuming, scrubbing, removal of insulation and deconstruction and reconstruction of the attic and roof.


    We neutralize the mold, or bacteria in your attic, crawl space, home, building, vehicle, or property by applying our eco-friendly, safe chemical on all surfaces and airborne, focusing our efforts on the visible mold areas. Depending on the job, we apply our formula by spray, mist, foam, or fog. We further kill all airborne mold spores in your attic. The average time of our on-site service is approximately one hour. An additional four hours is required to achieve maximum effectiveness. We ask that you stay out of the attic for approximately 5 hours in total. Read more about how we work.

    Pacific Decontamination Services uses the world’s strongest, most effective and safe antimicrobial disinfectant, deodorization and chemical decontaminate. Our professional application will eliminate up to 99.99999% of any allergen, germ, bacteria or fungus that it touches. AND as powerful as it is, it is also completely safe.

    What do you do next? How do you solve the challenge of mold and associated health hazards?

    Call Pacific Decontamination Services at 778-269-0208 or email us at our email address: contact @ pacificdecon dot com

    Serving All of Vancouver Island: Victoria, Cowichan, Duncan, Nanaimo, Parksville, Qualicum, Courtenay, Comox, Campbell River, and Port Alberni.

  • Home Inspection Finds Mold In Attic Nanaimo

    Home Inspection Finds Mold In Attic Nanaimo

    What To Do When a Home Inspection During a Real Estate Transaction Finds Mold in the Attic

    Whether you’re buying or selling a home in Victoria, Cowichan, Duncan, Nanaimo, Parksville, Qualicum, Port Alberni, Courtenay, Comox, or Campbell river, mold is a fact of life. Mold spores are floating in the air all around us. They don’t “grow” until they can attach themselves to a moist surface. Attic mold tends to go undetected because the attic’s not a place a homeowner spends much time hanging around in – so when attic mold turns up on a home inspection, it’s often a surprise to both buyer and seller.

    If you find mold in the attic, first, relax. Mold in these areas isn’t a significant factor in indoor air quality, and truthfully, most molds are relatively harmless to humans. Visible mold is ready to be remedied and doesn’t require costly testing. What you don’t want to do is leave mold untreated, because the materials the mold has attached to can cause issues with timber and framing integrity. In the attic, mold can degrade drywall, spread to the ceiling below, and even cause problems with your roof’s life expectancy. Facts About Mold Click Here

    CAUSES OF ATTIC MOLD

    Attic mold occurs in the attic primarily due to the accumulation of moisture from condensation in the gap your attic fills between your warm house and the cold air outside your roof. Improper ventilation in the attic is actually worse in newer homes.

    Mold can also grow in the attic when a home has been built during Vancouver Island’s wet months. If interior wood framing and plywood had not been sufficiently dried before adding drywall and roofing material, moisture could be trapped inside.

    Other factors that can contribute to attic mold are improperly vented combustion appliances like the stove or dryer; improperly venting kitchen or bathroom fans; improperly installed rain gutters; or a leaking roof.

    ERADICATING MOLD IN THE ATTIC

    It is just as important to fix the moisture problem as it is killing the mold.

    If you don’t correct the cause of the moisture-inducing environment mold will return. For attics, the key to correcting the cause is to consider hiring a professional to design and install the proper attic ventilation plan. Continually moving the air through the attic will keep condensation – and mold growth – at bay. Ensure enclosed attics, and enclosed rafter spaces have cross-ventilation for each separate area. Outside air enters into the attic space from intake vents, soffits, eave vents, roof-top edge venting or gable end-vents, passing through the attic displacing warm, moisture-laden air, which exits the attic via exhaust vents at or near the peak of the roof. Other site-specific fixes include repairing a leaking roof or fixing improperly vented appliances and exhaust fans.

    PACIFIC DECONTAMINATION SERVICES WILL NEUTRUALIZE YOUR MOLD, SPORES AND MYCOTOXINS IN YOUR ATTIC.
    We issue a CERTIFICATE OF DECONTAMINATION

    Pacific Decontamination Services can neutralize your mold up 99.99999%. If our spray, fog or foam can touch it, we can neutralize it. Our services come at a fraction of the cost as compared to the expensive approaches like soda / dry ice blasting, hepa vacuuming, scrubbing, removal of insulation and deconstruction and reconstruction of the attic and roof.

    We then issue a Certificate of Decontamination that seller can provide to the prosective buyer.

    Pacific Decontamination Services uses the world’s strongest, most effective and safe antimicrobial disinfectant, deodorization and chemical decontaminate. Our professional application will eliminate up to 99.99999% of any allergen, germ, bacteria or fungus that it touches. AND as powerful as it is, it is also completely safe.

    What do you do next? How do you solve the challenge of mold and associated health hazards?

    Call Pacific Decontamination Services at 778-269-0208 or email us at our email address: contact @ pacificdecon dot com

    Serving All of Vancouver Island: Victoria, Cowichan, Duncan, Nanaimo, Parksville, Qualicum, Courtenay, Comox, Campbell River, and Port Alberni.

  • Sick Building Syndrome – The Dangers And How To Prevent It

    Sick Building Syndrome – The Dangers And How To Prevent It

    Black mold is dangerous and can impact homeowners in Victoria, Cowichan, Duncan, Nanaimo, Parksville, Qualicum, Courtenay, Comox, Campbell River, and Port Alberni.

    Mold to Vancouver Island is like wetness to water.  Mold is everywhere, but it is important that you know the dangers of black mold exposure.

    Mold is the culprit behind the SBS “sick building syndrome,” characterized by complications within the respiratory system. You find it in the rooms, and spaces with a high level of moisture. The spores produced by the mold, for reproduction, are the cause of the respiratory, and to some extent, nervous system complications.

    Where is black mold most likely to grow?

    Mold spores produce Volatile Organic Compounds (VOC’s), which interfere with the performance of the respiratory tract, and nervous systems. Inhalation is the main mode of infection, although they are also ingested. The first signs of infection resemble those that occur when you develop a cold. The mucous membranes of your respiratory tract become inflamed, and you start sneezing. You will then develop a fever, and fatigue will set in. Other symptoms include dizziness, constant headaches, difficulty in concentration, loss of memory, and general sluggishness.

    If you are not aware of the dangers of black mold exposure, you may confuse the symptoms to be an allergic reaction to something else. In the past, black mold was not considered to be a major concern, until recently. Exposure to a large number of spores, or prolonged exposure over time, can lead to internal bleeding, and the presence of blood in body tissues, which can be lethal. Any unexplained internal body pain and discomfort is a sign of serious exposure to black mold.

    Homeowners do not realize they are suffering from the effects of black mold since they have become accustomed to their environment. If you have lived in a musty home, and are exposed to low-levels of black mold, you may get accustomed to the odor of your home, and not seek immediate help. Over time, you will begin feeling unwell and assume that you are suffering from another ailment. You should be constantly aware of the dangers of black mold, and how the symptoms manifest themselves. This knowledge will spare you a lot of pain, and discomfort, in the future.

    We neutralize your black mold by applying our eco-friendly, safe chemical into your attic, crawlspace, or basement. Depending on the job, we apply our formula by spray, mist, foam, or fog. We do not use a tent. The average time of our on-site service is approximately one hour. An additional four hours is required to achieve maximum effectiveness. We ask that you stay out of the premise for approximately 5 hours in total. Read more about how we work.

    Pacific Decontamination Services uses the world’s strongest, most effective and safe antimicrobial disinfectant, deodorization and chemical decontaminate. Our professional application will eliminate up to 99.99999% of any allergen, germ, bacteria or fungus that it touches. AND as powerful as it is, it is also completely safe.

    What do you do next? How do you solve the challenge of mold and associated health hazards?

    Call Pacific Decontamination Services at 778-269-0208 or email us!

    Serving All of Vancouver Island: Victoria, Cowichan, Duncan, Nanaimo, Parksville, Qualicum, Courtenay, Comox, Campbell River, and Port Alberni.